PRODUCT CENTER

Home    Electricity Meter    LGG100 Single Phase Electronic Whole Current Credit Meter
控件[tem_25_34]渲染出错,Source:未将对象引用设置到对象的实例。
LGG100
  • LGG100 is a single phase two wire electronic whole current credit meter, it offers an advanced Anti-tamper solution to help utility increase the revenues and decrease the line loss. It has many practical functions such as : tamper event record function, billing record function, communication function and so on to make the energy management easily and efficiently.

    A wise solution for commercial and industrial customer.

     

  • LGG100 is a single phase two wire electronic whole current credit meter, it offers an advanced Anti-tamper solution to help utility increase the revenues and decrease the line loss.
    It has many practical functions such as : tamper event record function, billing record function, communication function and so on to make the energy management easily and efficiently.
    A wise solution for commercial and industrial customer.
    • Rated voltage(Un)
      240V
    • Operating voltage range
      70%Un~120%Un
    • Rated Current and Starting Current
      5(60)A and 0.4%Ib
    • Rated frequency
      50Hz +/- 5%
    • Power Consumption
      Voltage circuit <1W and 4VA ,Current circuit <0.5 VA
    • Battery and Life
      Lithium battery 1200mAh and life more than 15 years
    • Tropical working temperature
      -40℃ to +70℃, Humidity is up to 95%
    • EMC Performance
      Impulse voltage > 8KV, AC voltage > 4KV, Short circuit current > 3KA, Electrostatic Discharge > 8KV&20KV etc.
    • Protection class
      IP54 comply with IEC60529 Insulation grade II
    • Housing material
      Polycarbonate with non-conductive, high impact, smooth finish, durable, non-flammable, UV stabilized, UV resistant and high resistance to weathering
    • Pulse Constant
      1000imp/kWh
    • Accuracy Class
      Cl.1 for Active
    • Dimension
      146mmX120mmX50mm

LGG100 Single Phase Electronic Whole Current Credit Meter

控件[tem_25_34]渲染出错,Source:未将对象引用设置到对象的实例。